Versigen In-Counter Food Warmer | SFD4
In-Counter Versitop Food Warmers are designed to maintain cooked food temperatures. They are not induction type units and can be used with any suitable heatproof food container. All units are supplied with a control box for fitting by the installer, complete with 10 amp cable and plug.
In-counter Versitops have a 20 mm flange to support the unit, and a control box with illuminated on/off switch and temperature controller. The surface temperature of the panels is adjustable to a maximum of 120ºC.
Four sizes: 2GN, 3GN, 4GN and 5GN. Detailed dimensions in spec sheet - see documents.
The control box is connected to the underside of the unit by approximately 1.5 metres of cable. A minimum clearance of 30 mm below each unit is required to allow for cable exit.
Product Features
To contact Versigen Australia about Versigen In-Counter Food Warmer | SFD4 use Get a quote.
In-Counter Versitop Food Warmers are designed to maintain cooked food temperatures. They are not induction type units and can be used with any suitable heatproof food container. All units are supplied with a control box for fitting by the installer, complete with 10 amp cable and plug.
In-counter Versitops have a 20 mm flange to support the unit, and a control box with illuminated on/off switch and temperature controller. The surface temperature of the panels is adjustable to a maximum of 120ºC.
Four sizes: 2GN, 3GN, 4GN and 5GN. Detailed dimensions in spec sheet - see documents.
The control box is connected to the underside of the unit by approximately 1.5 metres of cable. A minimum clearance of 30 mm below each unit is required to allow for cable exit.
Product Features
To contact Versigen Australia about Versigen In-Counter Food Warmer | SFD4 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product