Versigen - In-Counter Food Warmer | SFD2

Supplier: Versigen Australia

In-Counter Hot Food Display | SFD2

In-Counter Versitop | SFD2

Transform your Foodservice Counter, Servery or Breakfast Buffet with the Modern Alternative to traditional Bain Maries. Cost-effective and Simple installation

Display Hot Food - Black Ceramic Warmers

In Stock

In-Counter Versitop Food Warmers are designed to maintain cooked food temperatures. They are not induction type units and can be used with any suitable heatproof food container. All units are supplied with a control box for fitting by the installer, complete with 10 amp cable and plug.

In-counter Versitops have a 20 mm flange to support the unit, and a control box with illuminated on/off switch and temperature controller. The surface temperature of the panels is adjustable to a maximum of 120ºC.

Four sizes: 2GN, 3GN, 4GN and 5GN. Detailed dimensions in spec sheet - see documents.

The control box is connected to the underside of the unit by approximately 1.5 metres of cable. A minimum clearance of 30 mm below each unit is required to allow for cable exit.

Product Features

Manufactured from 1/1GN size black tempered glass heating panels and polished stainless steel
Maintains food temperature in any heatproof container, except cast iron
Chafing dishes not required
Unlike induction-type units, dishes can be placed anywhere on the Food Warmer
Exceptionally low power consumption, connect to any standard 10amp socket
Even temperature across the entire surface area of each panel with no hot spots
Units supplied with stainless steel flange to facilitate simple installation
Supplied with a control box containing illuminated on/off switch and temperature controller, with approx. 1.5 metres of cable for fitting in a convenient location
Rapid heat up and cool down times
Sizes from 2GN to 5GN long
Easy to clean, the units have no exposed elements or generate steam

To contact Versigen Australia about Versigen In-Counter Food Warmer | SFD2 use Get a quote.

Four sizes: 2GN, 3GN, 4GN and 5GN. Detailed dimensions in spec sheet - see documents.

The control box is connected to the underside of the unit by approximately 1.5 metres of cable. A minimum clearance of 30 mm below each unit is required to allow for cable exit.

Product Features

Manufactured from 1/1GN size black tempered glass heating panels and polished stainless steel
Maintains food temperature in any heatproof container, except cast iron
Chafing dishes not required
Unlike induction-type units, dishes can be placed anywhere on the Food Warmer
Exceptionally low power consumption, connect to any standard 10amp socket
Even temperature across the entire surface area of each panel with no hot spots
Units supplied with stainless steel flange to facilitate simple installation
Supplied with a control box containing illuminated on/off switch and temperature controller, with approx. 1.5 metres of cable for fitting in a convenient location
Rapid heat up and cool down times
Sizes from 2GN to 5GN long
Easy to clean, the units have no exposed elements or generate steam