Forming & Portioning Machine | RFM-400

Supplier: BAKEWISE PTY LTD

Receive 1-3 days from order

MOLDING MACHINE FOR PLASTIC FLAT-BOTTOMED PRODUCTS RFM-400

The hopper of the molding machine is filled manually or automatically using either continuously Buyer’s transport system continuously or manually. The body of the hopper is made of aluminum.

Safety bunker crossbar performs emergency stop switch function, namely to stop the operation of the machine, if the operator is storing in a container (not acceptable in the case of automatic loading).

The pressure in the hopper is provided by jetting shafts, mass is forced through a nozzle onto a rotating shaft of the molding which is made from special ultraplastic.

The final product (formed) molded to the vacuum belt. A shaft at the edge of the knife belt serves to transfer product to the next transport system or machine.

Protective screens are made of plexiglas.

The side wall of the working chamber is removed by hand without special tools. The batcher is made of ultraplastic, inside is a special scraper to clean off excess product.

The drives are controlled by frequency converters. The belt has a tension system. Purification from belt by scrapers made into a storage tray made of stainless steel.

SPECIFICATIONS

Working width: 400 mm
Capacity: up to 10800 bars/h
Compressed air: 6-7 bar
Weight: 650 kg
Electric power: 380 V, 50Hz, 3 phases
Dimensions LxWxH: 1600x1150x1800 mm
The height of the standard bunker: 1800 mm

To contact BAKEWISE PTY LTD about Forming & Portioning Machine | RFM-400 use Get a quote.

MOLDING MACHINE FOR PLASTIC FLAT-BOTTOMED PRODUCTS RFM-400

The hopper of the molding machine is filled manually or automatically using either continuously Buyer’s transport system continuously or manually. The body of the hopper is made of aluminum.

The pressure in the hopper is provided by jetting shafts, mass is forced through a nozzle onto a rotating shaft of the molding which is made from special ultraplastic.

The final product (formed) molded to the vacuum belt. A shaft at the edge of the knife belt serves to transfer product to the next transport system or machine.

Protective screens are made of plexiglas.

The side wall of the working chamber is removed by hand without special tools. The batcher is made of ultraplastic, inside is a special scraper to clean off excess product.

The drives are controlled by frequency converters. The belt has a tension system. Purification from belt by scrapers made into a storage tray made of stainless steel.

SPECIFICATIONS

Working width: 400 mm
Capacity: up to 10800 bars/h
Compressed air: 6-7 bar
Weight: 650 kg
Electric power: 380 V, 50Hz, 3 phases
Dimensions LxWxH: 1600x1150x1800 mm
The height of the standard bunker: 1800 mm

Read less...

To contact BAKEWISE PTY LTD about Forming & Portioning Machine | RFM-400 use Get a quote.

Let BAKEWISE PTY LTD provide you with a quote

Supplier

Get a quote

Supplier: BAKEWISE PTY LTD

Distribution: AUSTRALIA, NEW ZEALAND & OCEANIA

Location: Windsor, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. BAKEWISE PTY LTD are also proudly displaying these credentials:

Established:

2019

Employees:

6-20

Memberships:

Baking association Australia (BAA), Hawkesbury Business Chamber,

Distribution:

AUSTRALIA, NEW ZEALAND & OCEANIA

Location:

Windsor , NSW

Joined:

Oct 2024